CZ Stud Earring Range
Nine pairs of cubic zirconia studs in 18K gold PVD over 316L steel — clusters, fans, butterfly and drop shapes; quoted per design.
Stainless Steel Earrings · Stainless Steel · MOQ 50 pcs
Three arcs crossing, one stone in the middle
Three polished half-arcs loop over and under each other to make a small open knot, and a single round stone sits in the gap at the centre. Solid gold-tone metal, one stone, nothing else.
Overview
About this triple arc stud earrings
The stud is built from three tubes, each bent into a half-arc and turned so they overlap: two run one way, the third crosses them, and the ends finish in rounded tips that sit just clear of the lobe. The gaps between the arcs are part of the design, so the piece reads as open metal rather than a solid block. Polished all round, including the insides of the curves, so it catches light from any angle.
A single round cubic zirconia is held in the space where the arcs cross, close to the face of the earring, so the stone is framed by the metal instead of sitting in front of it. One design, gold tone over 316L steel, on a post with a butterfly.
- ✓Three half-arcs crossing, so the stud reads as open metal
- ✓One round stone set in the gap where the arcs meet
- ✓Polished inside the curves as well, so it lights from every angle
- ✓Rounded tips keep the arcs clear of the lobe
Specification
What you are ordering
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Type | Stud earrings — three crossing half-arcs on a post |
| Stones | One round cubic zirconia, clear, set at the centre |
| Finish | Gold tone |
| Surface | Polished on all faces, including the inside of each arc |
| Back | Post and butterfly |
Variants
Configurations we build most often
Finish
Gold tone as shown; steel tone quoted on request.
Stone
Clear cubic zirconia as shown; other shades quoted per order.
Back
Post and butterfly as standard; other fittings quoted on request.
Materials
Materials and plating
| Option | What it means |
|---|---|
| 316L stainless steel | The arcs and post are 316L, so the curves hold their shape and the surface does not tarnish. |
| Cubic zirconia | One lab-made clear stone at the centre; not a natural gemstone. |
| Gold tone | Gold colour over steel; the plating spec is quoted per order. |
316L
The grade, in plain terms
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Where this piece earns its keep
Sculptural studs
For buyers who want a metal-led stud with almost no stone.
Everyday retail
The open arcs keep it light enough to wear daily.
Matching sets
Pairs with plain gold-tone chains and cuffs in the same finish.
Sizing
Sizes and how we set them
| Dimension | Guidance |
|---|---|
| T | |
| h | |
| e | |
| a | |
| r | |
| c | |
| s | |
| s | |
| e | |
| t | |
| t | |
| h | |
| e | |
| f | |
| a | |
| c | |
| e | |
| s | |
| i | |
| z | |
| e | |
| a | |
| n | |
| d | |
| t | |
| h | |
| e | |
| s | |
| t | |
| u | |
| d | |
| s | |
| i | |
| t | |
| s | |
| f | |
| l | |
| a | |
| t | |
| a | |
| g | |
| a | |
| i | |
| n | |
| s | |
| t | |
| t | |
| h | |
| e | |
| l | |
| o | |
| b | |
| e | |
| ; | |
| t | |
| h | |
| e | |
| t | |
| h | |
| r | |
| e | |
| e | |
| c | |
| u | |
| r | |
| v | |
| e | |
| s | |
| a | |
| r | |
| e | |
| m | |
| a | |
| t | |
| c | |
| h | |
| e | |
| d | |
| b | |
| y | |
| h | |
| a | |
| n | |
| d | |
| s | |
| o | |
| t | |
| h | |
| e | |
| p | |
| a | |
| i | |
| r | |
| m | |
| i | |
| r | |
| r | |
| o | |
| r | |
| s | |
| . | |
| T | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| f | |
| a | |
| c | |
| e | |
| s | |
| i | |
| z | |
| e | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| s | |
| e | |
| l | |
| l | |
| s | |
| a | |
| n | |
| d | |
| w | |
| e | |
| w | |
| i | |
| l | |
| l | |
| c | |
| o | |
| n | |
| f | |
| i | |
| r | |
| m | |
| i | |
| t | |
| o | |
| n | |
| a | |
| s | |
| a | |
| m | |
| p | |
| l | |
| e | |
| . |
Price list
Quote a triple arc stud earrings
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Questions about this triple arc stud earrings
Is it one piece of metal or three?
Three separate arcs, joined where they cross. The gaps between them are left open, which is why the stud reads as a small knot rather than a disc.
Where is the stone set?
One round cubic zirconia sits at the centre, in the space where the arcs cross, held close to the face of the earring so the metal frames it.
Does it sit flat on the ear?
Yes. The arcs are turned so their rounded ends come back toward the lobe, and the whole piece sits against the ear on a standard post and butterfly.
Can it be ordered in steel tone?
Yes, the same design runs without gold colour on request. The plating spec for the gold-tone version is quoted per order.
Are you a manufacturer or a trading company?
We are a China-based B2B fashion jewellery supplier with our own design, sourcing and quality-control team, and we do not own a factory. The benches your order runs on belong to partner production lines in Guangdong that we work with directly and visit during your production. We publish no factory address, floor area, headcount or founding year, because those numbers describe a plant rather than the service you are buying. Ask any supplier this question, and check whether the answer matches the paperwork you get.
Keep looking
Other pieces in this range
Dome Hoop Earrings
Gold-tone 316L steel hoop earrings with a domed, high-polish face — a chunky hoop sold as one pair, with a hinged closure.
Pleated Fan Stud Earrings
Gold-tone pleated fan studs in 316L steel, with six small round cubic zirconia set along the folds.
CZ Double Huggie Earrings
A gold-tone 316L steel double huggie with two parallel rows of cubic zirconia, hinged so it opens and closes as one piece.
More in this series
Other earrings in stainless steel
Cabochon Stud Earrings
Gold-tone studs stacking a faceted stone over a large oval cabochon, in pale blue over deep blue or pale green over green — two designs.
Coloured CZ Stud Earrings
Step-cut coloured cubic zirconia cluster studs in 316L steel — red, purple, green and pink, per pair.
CZ Arc Drop Earrings
A double arc hoop with three drops swinging beneath it — plain gold teardrop, square clear stone, engraved star teardrop.
CZ Pleated Stud Earrings
Gold-tone 316L steel studs formed from two nested arcs, set with five cubic zirconia in round, marquise and pear cuts.
CZ Stud Earrings
316L stainless steel CZ stud earrings. A prong-set cubic zirconia on a skin-safe steel post, tarnish-free and waterproof, with comfort backs sized to stay put.
Detachable CZ Stud Earrings
A bezel-set CZ stud with a detachable drop piece, so one pair reads as a stud or as a drop — several designs, quoted per pair.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.