Necklaces · Sterling Silver
Chain length decides who the necklace is for, and clasp quality decides whether it comes back. Both are specified per design here, along with the metal weight of the chain.
Range
MOQ 30 pcs per design for sterling silver. Length, link and weight on every spec line.
Solid 925 silver rope chain, 2–5 mm, at any length from 40 to 60 cm. Weight and clasp specified per line; the base of almost every silver pendant range.
Single-stone pavé pendant in 925 silver on a fine chain. Halo setting specified on the drawing; stone size and colour are yours to choose.
Flat square-link 925 silver box chain, 1.2–2.5 mm. Sits flat, resists twisting, and holds a pendant without turning over.
Two or three fine 925 silver chains at fixed drop lengths on one clasp. Sells the layered look as a single piece, at a higher price than the chains would alone.
Necklaces
Necklace complaints are almost always one of two things: the chain is the wrong length for the neckline being sold to, or the clasp failed. Both are engineering decisions, and both are cheap to get right before production and expensive to fix afterwards.
Length is the commercial one. A 40 cm chain sits at the collarbone and reads young; 45 cm is the volume seller in most markets; 50–60 cm layers over knitwear and sells to a different customer entirely. In sterling silver the length also changes the metal content, so a long chain is not a free variation of a short one — we quote the length run rather than letting it slide.
Material
| Fact | Detail |
|---|---|
| Hardness | Softer than 316L steel — we keep ring bands at 1.2 mm or above |
| Tarnish | Silver sulphides darken it in air; rhodium flash or anti-tarnish e-coat slows this |
| Finishes | High polish, satin, brushed, oxidised black, rhodium, 18K gold plate |
| Settings | Prong, bezel, pavé, channel, flush |
| Chain length | Where it sits and who buys it |
|---|---|
| 40 cm / 16 in | Collarbone. Young-leaning, reads as a layering piece |
| 45 cm / 18 in | The volume seller in most markets — the safe stock length |
| 50 cm / 20 in | Sits on the chest bone; layers well over a plain shirt |
| 55–60 cm / 22–24 in | Over knitwear or a dress; usually a higher price point |
Pricing
Only the bands that apply to these pieces are shown. At 100 pcs this category runs from $14.00 – 52.00 per piece, and the full material price table is on the sterling silver page.
| Item | Typical specification | Indicative ex-works | What it assumes |
|---|---|---|---|
| Necklace with chain | 4.0–9.0 g silver | $14.00 – 30.00 | At 100 pcs. 40–60 cm, cable, box or rope chain |
| Stone-set or statement piece | 8.0–15.0 g silver | $24.00 – 52.00 | At 100 pcs. Pavé, bezel or prong setting |
Price list
Send the basics and you will get our current price list for this material, plus stock availability and lead time.
What you get
Reply within one working day. No obligation, and no design file needed to start.
Necklaces FAQ
Keep reading
Six designs per material that buyers reorder rather than replace: the shapes that sell without a campaign behind them. Every one is a stock item, so y…
The designs moving fastest at the moment, and what is driving each one. Trend pieces are worth a small test order and a quick reorder — not a co…
Rings are the hardest category to get right, because sizing is where the returns live. We quote the size run, the band width and the metal weight per …
A bracelet is the piece customers tighten, drop and lose, so the closure matters as much as the design. We specify internal length, closure type and t…
Earrings touch skin all day, so the finding matters as much as the front. We specify the post or hook, the back, and whether the metal touching the ea…
Charms are the cheapest way to add a second purchase to a first one, and the easiest to get wrong on the jump ring. We specify size, weight, attachmen…
A matching set raises the average order and turns a piece into a gift. We quote the set against the sum of its parts so you can see exactly what the b…
The same design in three materials, and what each one does to your retail price and returns rate.
Microns, PVD against electroplating, and how to specify a finish that survives the customer.
How to size a first run you will not be stuck with.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.