Low minimum order · stock and custom
Stock lines start at 10 pcs per design, and made-to-order pieces start at 30 pcs in 925 silver and brass and 50 pcs in 316L stainless steel. A 100-piece order is therefore realistic for a boutique or a new brand: pieces are priced individually, by material and by weight, a mixed carton can carry several designs, and a physical sample is approved before anything runs to bulk. It will cost more per piece than a 500-piece order.
The minimums
A stock line holds the same design in all three materials where the shape allows, so one silhouette can start at 10 pcs in stock or 30 pcs–50 pcs made to order. The full published bands are on the silver, steel and brass pages.
| Material | Stock minimum | Custom minimum | Ring band, published | Published at | Sampling |
|---|---|---|---|---|---|
| Sterling Silver | 10 pcs | 30 pcs | $9.00 – 19.00 | 100 pcs | 10–15 days |
| Stainless Steel | 10 pcs | 50 pcs | $0.70 – 2.40 | 500 pcs | 7–12 days |
| Brass & Copper | 10 pcs | 30 pcs | $0.65 – 2.20 | 500 pcs | 7–12 days |
Why a small order works
The short version
At 100 pieces
At 100 pieces the silver bands below apply directly, because silver is published at exactly that quantity. Ranges are ex-works and per piece; the final quote is itemised against your own weight, size and plating.
| Item | Typical specification | Published band | What it assumes |
|---|---|---|---|
| Charm or small pendant | 1.5–3.0 g silver | $6.50 – 13.00 | At 100 pcs. Plain or with a single cubic zirconia |
| Ring, plain band or signet | 2.5–5.0 g silver | $9.00 – 19.00 | At 100 pcs. Width 1.5–6 mm, sizes 5–10 US |
| Earrings, per pair | 2.0–4.5 g silver | $8.00 – 18.00 | At 100 pcs. Studs, huggies, small hoops |
| Necklace with chain | 4.0–9.0 g silver | $14.00 – 30.00 | At 100 pcs. 40–60 cm, cable, box or rope chain |
| Bracelet or chain bracelet | 6.0–12.0 g silver | $17.00 – 36.00 | At 100 pcs. 16–21 cm, lobster or spring clasp |
| Stone-set or statement piece | 8.0–15.0 g silver | $24.00 – 52.00 | At 100 pcs. Pavé, bezel or prong setting |
| Matching set, 2–3 pieces | 12–22 g silver | $36.00 – 80.00 | At 100 pcs. Necklace plus earrings, or ring plus bracelet |
The same 100 pieces in steel or brass land above the published bands, because those two materials are published at 500 pcs — the mould, the machining setup and the plating run are spread over five times as many pieces at that tier. The gap is a unit-price difference, not a hidden charge: at 100 pieces the figure is quoted per order and shown as its own line. For comparison, a plain ring is published at $0.70 – 2.40 in steel and $0.65 – 2.20 in brass, both at 500 pcs.
Every figure on this page is a per-piece price at the quantity stated. Freight, plating thickness, stones and packing are quoted as their own lines, so comparing two quotations line by line tells you which one is plating thinner.
The trade-off
Small orders are not free, and a supplier who only lists the advantages is not telling you the whole story. These four are the real ones.
Getting started
The path we recommend to a boutique or a new brand, in the order that keeps your exposure smallest.
Order a sample of the pieces you are considering, in the material and plating you intend to buy. You approve what you can hold in your hand, and on silver you can see the weight the quote is built on.
Build the first order across several designs at each design's own minimum — a couple of silver rings, some steel bracelets, one or two brass earrings as colour tests. Minimums are per design, so eight designs means eight small minimums, not one large commitment.
The reorder is the real order: the tooling is already paid for, you are buying on sell-through rather than judgement, and a winning silhouette can move into a fuller size run or a second plating colour.
FAQ
The minimums, the trade-offs and the 10-piece question.
Keep reading
The silver range, priced on the gram with the weight on every design.
Waterproof, tarnish-free, and the lowest unit cost of the three.
The gold look at a fashion price point, plating quoted per micron.
How to size a first run you will not be stuck with.
Stock lines that reorder, from 10 pcs per design.
CAD in 48 hours, a sample in 7–15 days, production from 30 pcs per design.
Price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time within one working day.
What you get
Reply within one working day. No obligation, and no design file needed to start.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.