Rings · Sterling Silver
Rings are the hardest category to get right, because sizing is where the returns live. We quote the size run, the band width and the metal weight per design, and we will tell you which sizing standard your market actually uses.
Range
MOQ 30 pcs per design for sterling silver. Weight and band width are on every spec line.
Solid 925 silver signet with a flat face for engraving — initials, a monogram or your own brand mark. Cast from your artwork, weight published per size.
Hand-set pavé eternity band in 925 silver. Specify stone size, count, colour and setting; the setting pass is quoted as its own line on top of the metal.
Wide 925 silver band with a hand-hammered face. No stones, so the whole cost is metal and bench time — and the texture hides the scratches a daily-wear ring collects.
Slim 1.5 mm 925 silver band built to be stacked. The lowest-cost silver ring in the range and the easiest add-on at the point of sale.
Rings
A ring is the only piece of jewellery that has to fit a measurement, which makes it the one category where a design can be perfect and the order still fails. Sizes differ by market — US, EU (ISO), UK alphabetical, and the Chinese and Japanese numberings all describe the same finger differently — so the first question on any ring order is which standard your customer reads.
The second variable is band width, and it is where weight goes. A 2 mm band on a size 7 is around half the metal of a 6 mm band on the same finger, and in sterling silver that difference shows up directly in the price because metal is the main cost. We publish the width and the weight together so the quote is checkable rather than a number to argue with.
Material
| Fact | Detail |
|---|---|
| Hardness | Softer than 316L steel — we keep ring bands at 1.2 mm or above |
| Tarnish | Silver sulphides darken it in air; rhodium flash or anti-tarnish e-coat slows this |
| Finishes | High polish, satin, brushed, oxidised black, rhodium, 18K gold plate |
| Settings | Prong, bezel, pavé, channel, flush |
| Size run decision | What we recommend |
|---|---|
| Single size, sized to your spec | Best for made-to-order: your assay sizes dictate the run, no dead stock |
| A spread of 5–7 sizes | Best for stock: covers most fingers but leaves you carrying the extremes |
| Band width | 1.2–2 mm for a delicate stack ring; 3–6 mm for a signet; 8 mm or more for a statement band |
| Sizing method | We send a ring gauge or a printable sizer with the sample so your own team can confirm |
Pricing
Only the bands that apply to these pieces are shown. At 100 pcs this category runs from $9.00 – 52.00 per piece, and the full material price table is on the sterling silver page.
| Item | Typical specification | Indicative ex-works | What it assumes |
|---|---|---|---|
| Ring, plain band or signet | 2.5–5.0 g silver | $9.00 – 19.00 | At 100 pcs. Width 1.5–6 mm, sizes 5–10 US |
| Stone-set or statement piece | 8.0–15.0 g silver | $24.00 – 52.00 | At 100 pcs. Pavé, bezel or prong setting |
Price list
Send the basics and you will get our current price list for this material, plus stock availability and lead time.
What you get
Reply within one working day. No obligation, and no design file needed to start.
Rings FAQ
Keep reading
Six designs per material that buyers reorder rather than replace: the shapes that sell without a campaign behind them. Every one is a stock item, so y…
The designs moving fastest at the moment, and what is driving each one. Trend pieces are worth a small test order and a quick reorder — not a co…
Chain length decides who the necklace is for, and clasp quality decides whether it comes back. Both are specified per design here, along with the meta…
A bracelet is the piece customers tighten, drop and lose, so the closure matters as much as the design. We specify internal length, closure type and t…
Earrings touch skin all day, so the finding matters as much as the front. We specify the post or hook, the back, and whether the metal touching the ea…
Charms are the cheapest way to add a second purchase to a first one, and the easiest to get wrong on the jump ring. We specify size, weight, attachmen…
A matching set raises the average order and turns a piece into a gift. We quote the set against the sum of its parts so you can see exactly what the b…
The same design in three materials, and what each one does to your retail price and returns rate.
Microns, PVD against electroplating, and how to specify a finish that survives the customer.
How to size a first run you will not be stuck with.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.