Skip to content
B2B fashion jewellery from Guangdong · stock lines from 10 pcs · custom OEM/ODM · CAD in 48 hours Request a price list WhatsApp Email
PS PromistarsFashion Jewellery

Bracelets · Sterling Silver

925 Sterling Silver bracelets and bangles, length and closure decided up front

A bracelet is the piece customers tighten, drop and lose, so the closure matters as much as the design. We specify internal length, closure type and the metal weight of the run.

925 sterling silver ring, chain and hoop earrings on a linen surface
Minimum order
30 pcsper design
Indicative
$17.00 – 52.00per piece at 100 pcs
Sample
10–15 dayson custom designs
Production
20–30 daysafter sample approval

Range

Bracelets in production

MOQ 30 pcs per design for sterling silver. Length or diameter on every spec line.

Sterling Cable Chain Bracelet

Sterling Cable Chain Bracelet

Solid 925 silver cable chain bracelet in 1.5–3 mm widths and 16–20 cm lengths. The plain baseline of a silver range: cheap to buy, easy to add to a basket, and it does not date, so the same SKU stays in the line.

  • MOQ30 pcs
  • Indicative$17.00 – 36.00
  • MaterialSterling Silver
  • Weight3.0–9.5 g by width and length
Engravable ID BraceletBestseller

Engravable ID Bracelet

Solid 925 silver ID bracelet with a flat engravable plate on a cable or curb chain. Your text or logo, laser or hand-stamped, with plate width and chain quoted as separate lines so you can see what the engraving adds.

  • MOQ30 pcs
  • Indicative$17.00 – 36.00
  • MaterialSterling Silver
  • Weight8.0–16.0 g
CZ Tennis Bracelet

CZ Tennis Bracelet

Hand-set cubic zirconia tennis bracelet in 925 silver. A continuous line of prong-set stones on a box clasp with a safety catch; stone size, count and colour quoted as their own lines on top of the metal.

  • MOQ30 pcs
  • Indicative$24.00 – 52.00
  • MaterialSterling Silver
  • Weight6.0–12.0 g

Bracelets

How to buy this category

Bracelet returns split almost evenly between two causes: the length was wrong for the wrist, and the closure opened. Both are decided on the drawing, before a single piece is cast, which is why this page leads with measurements rather than photographs.

Length depends on the construction. A chain bracelet needs 2–3 cm of slack to hang properly and typically runs 16–19 cm; a rigid bangle has to pass over the knuckles and is specified by internal diameter, usually 55–65 mm. In sterling silver the same design specified as a bangle rather than a chain uses noticeably more metal, so the two are quoted as separate builds rather than variations of one price.

  • ✓Chain length or bangle diameter stated in millimetres, not as 'standard'
  • ✓Lobster, box, toggle and adjustable slider closures — matched to the piece's weight
  • ✓Engravable ID plates and flat cuffs ready for your own marking
  • ✓Slider and drawstring closures give roughly 3 cm of adjustment from one SKU

Material

What you are specifying

FactDetail
HardnessSofter than 316L steel — we keep ring bands at 1.2 mm or above
TarnishSilver sulphides darken it in air; rhodium flash or anti-tarnish e-coat slows this
FinishesHigh polish, satin, brushed, oxidised black, rhodium, 18K gold plate
SettingsProng, bezel, pavé, channel, flush
ConstructionHow we specify it
Chain bracelet16–19 cm internal, 2–3 cm of slack so it hangs rather than grips
Rigid bangleInternal diameter 55–65 mm — it must clear the knuckles, not the wrist
Open cuffGap set to your spec; brass and steel hold shape better than silver
Adjustable sliderRoughly 3 cm of range from one size; the cheapest way to skip a size run

Pricing

Indicative pricing for this category

Only the bands that apply to these pieces are shown. At 100 pcs this category runs from $17.00 – 52.00 per piece, and the full material price table is on the sterling silver page.

ItemTypical specificationIndicative ex-worksWhat it assumes
Bracelet or chain bracelet6.0–12.0 g silver$17.00 – 36.00At 100 pcs. 16–21 cm, lobster or spring clasp
Stone-set or statement piece8.0–15.0 g silver$24.00 – 52.00At 100 pcs. Pavé, bezel or prong setting
Indicative 100 pcs ex-works ranges for sterling silver, compiled September 2026. Planning figures, not a quotation — the final price depends on size, weight, plating thickness, stones, packing and Incoterm.

Price list

Request the price list

Send the basics and you will get our current price list for this material, plus stock availability and lead time.

Reply within one working day · CAD in 48 hours · sample before bulk production · no obligation.

What you get

Quoted line by line, not as a lump sum

  • ✓Metal or base, plating in microns, stones and packing priced separately
  • ✓Weight and dimensions on the drawing before anything is cast
  • ✓A physical sample approved by you before any bulk run
  • ✓Photographs of your pieces at every production milestone
  • ✓Freight quoted for your route — courier, air or sea

Reply within one working day. No obligation, and no design file needed to start.

Bracelets FAQ

Questions about bracelets in sterling silver

Should I order chain bracelets or bangles?
It depends on the returns you are willing to absorb. A chain bracelet with an adjustable or slider closure fits most wrists from one SKU, which is why it dominates online. A rigid bangle looks more considered and costs more metal, but it must clear the knuckles, so a single diameter fits a narrower slice of customers and you will need two or three diameters to cover the same range.
What is the metal cost difference between a chain and a bangle?
A rigid bangle is usually the heavier build because it has to hold its own shape, so in sterling silver it carries more metal than an equivalent chain bracelet and prices accordingly. That is a real cost, not a styling premium. We quote the two builds separately so you can see the gap before you choose the silhouette.
Which closure should I specify?
Lobster for anything sold as everyday wear, because it is the most reliable per unit of cost. Toggle is the right choice for a heavier chain where a lobster feels undersized. Slider or adjustable closures are best when you want one SKU to fit many wrists. Magnetic closures sell, but we would not put them on a piece you describe as everyday.
Can you engrave the inside of a cuff or an ID plate?
Yes. Laser engraving on the inside of a flat cuff or on an ID plate is straightforward and is quoted as its own line because it is a separate step with a one-off setup. Send the artwork or the wording; we will send a photograph of the first engraved piece for approval before the run continues.

Keep reading

More in sterling silver, and the guides

Sterling Silver Best Sellers

Six designs per material that buyers reorder rather than replace: the shapes that sell without a campaign behind them. Every one is a stock item, so y…

Sterling Silver Trending

The designs moving fastest at the moment, and what is driving each one. Trend pieces are worth a small test order and a quick reorder — not a co…

Sterling Silver Rings

Rings are the hardest category to get right, because sizing is where the returns live. We quote the size run, the band width and the metal weight per …

Sterling Silver Necklaces

Chain length decides who the necklace is for, and clasp quality decides whether it comes back. Both are specified per design here, along with the meta…

Sterling Silver Earrings

Earrings touch skin all day, so the finding matters as much as the front. We specify the post or hook, the back, and whether the metal touching the ea…

Sterling Silver Charms

Charms are the cheapest way to add a second purchase to a first one, and the easiest to get wrong on the jump ring. We specify size, weight, attachmen…

Sterling Silver Sets

A matching set raises the average order and turns a piece into a gift. We quote the set against the sum of its parts so you can see exactly what the b…

Silver vs steel vs brass

The same design in three materials, and what each one does to your retail price and returns rate.

Plating & finishes

Microns, PVD against electroplating, and how to specify a finish that survives the customer.

MOQ and the first order

How to size a first run you will not be stuck with.

Get the price list

Send your line sheet. Get a price list the same day.

Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.

  • ✓Price list per material, with MOQ and lead time on every line
  • ✓CAD drawing in 48 hours on custom designs
  • ✓Physical sample before any bulk run
  • ✓Photographs of your pieces at every production milestone

Price list

Price list, one working day

Two minutes to fill in. No design file needed to start.

Reply within one working day · CAD in 48 hours · sample before bulk production · no obligation.