Earrings · Sterling Silver
Earrings touch skin all day, so the finding matters as much as the front. We specify the post or hook, the back, and whether the metal touching the ear is the plated one.
Range
MOQ 30 pcs per design for sterling silver, quoted per pair. Findings named on every spec line.
925 silver huggie hoops with a hinged snap-post closure, 10–14 mm outside diameter and 2–3 mm tube. The small everyday hoop that stays on, sold by the pair or by the multi-pack.
Pavé-set cubic zirconia stud earrings in 925 silver, 4–8 mm. The volume stud of a silver range, with the setting and the earring back specified rather than left to the cheapest option.
Twisted rope hoops in solid 925 silver, 12–25 mm, with a hinged or post closure. The twisted surface catches light so a lighter gauge reads as heavier than a plain tube of the same weight.
Earrings
Earrings are the category where the invisible part decides the return rate. The front can be perfect and the order still comes back if the post irritates a sensitive ear, the back will not hold, or the hook is too thin for a heavier drop.
That is why we quote earrings by the pair with the finding named: post and butterfly, huggie hinge, fishhook, lever-back or threader. In sterling silver the finding is also where a sensible cost decision lives — stainless steel posts and backs on a plated brass earring cost a little more and remove the most common source of complaints.
Material
| Fact | Detail |
|---|---|
| Hardness | Softer than 316L steel — we keep ring bands at 1.2 mm or above |
| Tarnish | Silver sulphides darken it in air; rhodium flash or anti-tarnish e-coat slows this |
| Finishes | High polish, satin, brushed, oxidised black, rhodium, 18K gold plate |
| Settings | Prong, bezel, pavé, channel, flush |
| Finding | When we recommend it |
|---|---|
| Post and butterfly | Studs and small pieces; the cheapest and the most familiar |
| Huggie hinge | Close-fitting hoops; the closure is the design, so get it right |
| Fishhook / French wire | Drops and heavier pieces; it lets the earring hang properly |
| Lever-back | Anything a customer will not want to lose — the most secure option we make |
Pricing
Only the bands that apply to these pieces are shown. At 100 pcs this category runs from $8.00 – 52.00 per piece, and the full material price table is on the sterling silver page.
| Item | Typical specification | Indicative ex-works | What it assumes |
|---|---|---|---|
| Earrings, per pair | 2.0–4.5 g silver | $8.00 – 18.00 | At 100 pcs. Studs, huggies, small hoops |
| Stone-set or statement piece | 8.0–15.0 g silver | $24.00 – 52.00 | At 100 pcs. Pavé, bezel or prong setting |
Price list
Send the basics and you will get our current price list for this material, plus stock availability and lead time.
What you get
Reply within one working day. No obligation, and no design file needed to start.
Earrings FAQ
Keep reading
Six designs per material that buyers reorder rather than replace: the shapes that sell without a campaign behind them. Every one is a stock item, so y…
The designs moving fastest at the moment, and what is driving each one. Trend pieces are worth a small test order and a quick reorder — not a co…
Rings are the hardest category to get right, because sizing is where the returns live. We quote the size run, the band width and the metal weight per …
Chain length decides who the necklace is for, and clasp quality decides whether it comes back. Both are specified per design here, along with the meta…
A bracelet is the piece customers tighten, drop and lose, so the closure matters as much as the design. We specify internal length, closure type and t…
Charms are the cheapest way to add a second purchase to a first one, and the easiest to get wrong on the jump ring. We specify size, weight, attachmen…
A matching set raises the average order and turns a piece into a gift. We quote the set against the sum of its parts so you can see exactly what the b…
The same design in three materials, and what each one does to your retail price and returns rate.
Microns, PVD against electroplating, and how to specify a finish that survives the customer.
How to size a first run you will not be stuck with.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.