
Blue Drop and CZ Earrings
Two-tier stud earrings in 316L steel — a round cubic zirconia above a bezel-set blue teardrop stone, per pair.
Stainless Steel Earrings · Stainless Steel · MOQ 50 pcs
One linked drop, made in three colourways. Each earring starts with a single stone on a stud post, then steps down through small rounds, rectangles and ovals, all in plain gold-tone bezels and joined by short links so every stone turns on its own joint. Red runs burgundy, magenta and amber; the second stays clear and champagne; the third pairs two greens. 316L stainless steel with an 18K gold PVD finish.



Overview
This is a range, not one earring: three colourways of the same linked drop, quoted per colourway. Each begins at the lobe with a single stone set on a stud post, then hangs down through small round stones, rectangles and ovals, every one held in a plain gold-tone bezel with a short link between it and the next. Because the stones are on separate joints rather than one rigid bar, the drop moves in steps and each piece of colour turns on its own. The red colourway runs burgundy, magenta and amber; the second keeps to clear and champagne tones; the third pairs a soft green with a deeper leaf green. In the white and green versions a polished metal nugget sits mid-drop, so the earring alternates metal and stone.
Posts, links and bezels are 316L stainless steel, the grade family also sold as SUS316L, so the earrings do not tarnish and are hypoallergenic for everyday wear. The stones are cubic zirconia, coloured through the body rather than coated, so the shade stays even from pair to pair and survives a reorder. The gold is 18K gold PVD, bonded in a vacuum chamber over the steel rather than electroplated on, with plating thickness quoted per micron.
Specification
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Design | Three colourways of one linked drop; quoted per colourway |
| Stones | Coloured cubic zirconia in ovals, rectangles and a square set on point |
| Setting | Plain gold-tone bezels, each stone on its own link joint |
| Finish | 18K gold PVD over steel as shown; steel tone quoted on request |
| Fitting | Stud post at the top, with the whole drop hung below it |
Variants
Red, white-champagne or green; each colourway is quoted and packed as its own line.
18K gold PVD as shown; steel tone quoted on request, plating per micron.
Butterfly or push backs, matched to the posts you already use.
Materials
| Option | What it means |
|---|---|
| 316L stainless steel | Posts, links and bezels are 316L stainless steel, a marine-grade alloy with molybdenum at roughly 2-3% and chromium at 16-18%, which is why it does not tarnish and is safe against skin for daily wear. |
| Coloured cubic zirconia | Every stone is cubic zirconia, coloured through the body and set in a plain bezel. It is a laboratory material, not a natural stone, so the shade stays even across a run and across a reorder. |
| 18K gold PVD | The gold is 18K gold PVD, bonded in a vacuum chamber over the steel; plating thickness is quoted per micron. |
316L
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Three colourways of one shape make a compact card that reads as a single story.
A long linked drop carries colour without a large stone, so it moves with the head.
The drop packs flat and the three shades cover both warm and cool colour stories.
Sizing
| Dimension | Guidance |
|---|---|
| T | |
| h | |
| e | |
| s | |
| e | |
| a | |
| r | |
| e | |
| f | |
| i | |
| x | |
| e | |
| d | |
| d | |
| r | |
| o | |
| p | |
| s | |
| , | |
| s | |
| o | |
| t | |
| h | |
| e | |
| r | |
| e | |
| i | |
| s | |
| n | |
| o | |
| s | |
| i | |
| z | |
| e | |
| r | |
| u | |
| n | |
| : | |
| t | |
| h | |
| e | |
| d | |
| r | |
| o | |
| p | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| i | |
| s | |
| s | |
| e | |
| t | |
| b | |
| y | |
| t | |
| h | |
| e | |
| d | |
| e | |
| s | |
| i | |
| g | |
| n | |
| a | |
| n | |
| d | |
| s | |
| t | |
| a | |
| y | |
| s | |
| t | |
| h | |
| e | |
| s | |
| a | |
| m | |
| e | |
| a | |
| c | |
| r | |
| o | |
| s | |
| s | |
| t | |
| h | |
| e | |
| t | |
| h | |
| r | |
| e | |
| e | |
| c | |
| o | |
| l | |
| o | |
| u | |
| r | |
| w | |
| a | |
| y | |
| s | |
| . | |
| W | |
| h | |
| a | |
| t | |
| w | |
| e | |
| d | |
| o | |
| c | |
| o | |
| n | |
| f | |
| i | |
| r | |
| m | |
| w | |
| i | |
| t | |
| h | |
| y | |
| o | |
| u | |
| i | |
| s | |
| t | |
| h | |
| e | |
| p | |
| o | |
| s | |
| t | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| a | |
| n | |
| d | |
| t | |
| h | |
| e | |
| b | |
| a | |
| c | |
| k | |
| t | |
| y | |
| p | |
| e | |
| , | |
| s | |
| i | |
| n | |
| c | |
| e | |
| b | |
| o | |
| t | |
| h | |
| v | |
| a | |
| r | |
| y | |
| b | |
| y | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| . | |
| T | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| f | |
| i | |
| t | |
| t | |
| i | |
| n | |
| g | |
| y | |
| o | |
| u | |
| u | |
| s | |
| e | |
| n | |
| o | |
| w | |
| a | |
| n | |
| d | |
| w | |
| e | |
| q | |
| u | |
| o | |
| t | |
| e | |
| t | |
| o | |
| i | |
| t | |
| , | |
| p | |
| e | |
| r | |
| c | |
| o | |
| l | |
| o | |
| u | |
| r | |
| w | |
| a | |
| y | |
| . |
Price list
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Keep looking

Two-tier stud earrings in 316L steel — a round cubic zirconia above a bezel-set blue teardrop stone, per pair.

Gold-tone 316L steel drop earrings where bezel-set colour cubic zirconia is linked into a swinging tassel — hung from a stud post or a small pave hoop.

A U-bar drop earring with vertical rectangular stone bars — blue, green and brown, on a stone-set hook.

Pearl-drop studs in 316L steel and gold tone — set stones along the lobe with pear-shaped drops beneath, no hoop. Quoted per pair.
More in this series

Gold-tone 316L steel drop earrings with mismatched natural stones — two designs, each pair different left to right.

Two natural stone drop earrings in gold tone over 316L steel — a veined blue set and a warm brown set, each a three-part drop on a hooked wire.

Drop earrings with three glass stones in open-backed gold-tone frames — a round, a horizontal bar and a round — in green or smoke-black.

A double arc hoop with three drops swinging beneath it — plain gold teardrop, square clear stone, engraved star teardrop.

Gold-tone 316L steel studs with a large natural stone cabochon and a lower row of small clear stones, in three stone colours.

Gold-tone drop earrings built as a run of stone bars and cubic zirconia links, in banded brown or deep blue — two designs, quoted per design.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.