
CZ Disc Anklet
A gold-tone ankle chain in 316L steel — a fine chain with a round cubic zirconia disc and small CZ accents, single strand.
Stainless Steel Anklets · Stainless Steel · MOQ 50 pcs
An ankle chain rather than a bracelet, made to be worn low on the ankle: a fine gold-tone bead chain carrying around eleven flat round discs, each stamped with a fine radial sunburst so it catches the light as the foot moves. Gold tone over 316L stainless steel, closed with a lobster clasp and an extension chain.



Overview
This is an ankle chain, worn around the ankle rather than the wrist, and it is built on a fine gold-tone ball-and-bead chain. Around eleven flat round discs hang from the chain at intervals, each stamped with a fine radial sunburst, so the piece reads as a small repeating pattern of coins or discs. There is no stone anywhere on it — the look comes entirely from the engraved metal discs against the bead chain. It is a lightweight, warm-weather piece.
The metal is 316L stainless steel, a marine-grade alloy with molybdenum at roughly 2-3%, so the ankle chain does not tarnish and is hypoallergenic for daily wear; it is the same grade family sold as SUS316L. The finish is gold tone (electroplated) and the plating thickness is quoted per micron. It is supplied with an extension chain as standard, so one chain fits a range of ankles, and the length is set to the measurement you order rather than a fixed size.
Specification
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Type | Ankle chain (anklet) — worn around the ankle, not the wrist |
| Charms | Around eleven flat round discs, each engraved with a radial sunburst |
| Stones | None — the design is engraved metal throughout |
| Finish | Gold tone (electroplated) as shown; steel tone quoted on request |
| Clasp | Lobster clasp with an extension chain as standard |
Variants
Gold tone (electroplated) as shown; steel tone quoted on request, plating per micron.
Made to the ankle measurement you send; an extension chain is included as standard.
The number of discs follows the length — ask us if you want a heavier or a lighter run.
Materials
| Option | What it means |
|---|---|
| 316L stainless steel | The chain and the discs are 316L, a marine-grade alloy with molybdenum at roughly 2-3% and chromium at 16-18%, so the ankle chain does not tarnish and is safe against skin. |
| Engraved discs | The discs are flat metal, each stamped with a radial sunburst; there is no stone set into this piece, so nothing can fall out. |
| Gold tone | Electroplated gold over 316L steel; plating thickness is quoted per micron. |
316L
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
A lightweight ankle chain made for warm-weather and resort edits.
A plain base strand to layer with bead or cubic zirconia ankle chains.
A repeating disc pattern turns easily on a small counter display.
Sizing
| Dimension | Guidance |
|---|---|
| O | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| y | |
| o | |
| u | |
| r | |
| s | |
| i | |
| z | |
| e | |
| . | |
| T | |
| h | |
| i | |
| s | |
| i | |
| s | |
| a | |
| n | |
| a | |
| n | |
| k | |
| l | |
| e | |
| c | |
| h | |
| a | |
| i | |
| n | |
| m | |
| a | |
| d | |
| e | |
| t | |
| o | |
| t | |
| h | |
| e | |
| a | |
| n | |
| k | |
| l | |
| e | |
| m | |
| e | |
| a | |
| s | |
| u | |
| r | |
| e | |
| m | |
| e | |
| n | |
| t | |
| y | |
| o | |
| u | |
| g | |
| i | |
| v | |
| e | |
| u | |
| s | |
| a | |
| n | |
| d | |
| i | |
| s | |
| s | |
| u | |
| p | |
| p | |
| l | |
| i | |
| e | |
| d | |
| w | |
| i | |
| t | |
| h | |
| a | |
| n | |
| e | |
| x | |
| t | |
| e | |
| n | |
| s | |
| i | |
| o | |
| n | |
| c | |
| h | |
| a | |
| i | |
| n | |
| a | |
| s | |
| s | |
| t | |
| a | |
| n | |
| d | |
| a | |
| r | |
| d | |
| , | |
| s | |
| o | |
| o | |
| n | |
| e | |
| c | |
| h | |
| a | |
| i | |
| n | |
| f | |
| i | |
| t | |
| s | |
| a | |
| r | |
| a | |
| n | |
| g | |
| e | |
| o | |
| f | |
| a | |
| n | |
| k | |
| l | |
| e | |
| s | |
| . |
Price list
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Keep looking

A gold-tone ankle chain in 316L steel — a fine chain with a round cubic zirconia disc and small CZ accents, single strand.

A single-strand ankle chain in the open paperclip link style, in gold-tone 316L stainless steel, with a lobster clasp and an extension chain.
More in this series

Ball-bead and link strands layered with butterfly, heart and cubic zirconia charms — gold-tone 316L ankle chains, ordered to your size.

A gold-tone ankle chain in 316L steel — a fine chain with evenly spaced round metal bead stations, single strand.

A beach-themed ankle chain with a crab, a starfish and a cubic zirconia star charm, in gold-tone 316L stainless steel.

A gold-tone ankle chain in 316L steel — a fine link chain with a flat polished cross at the centre, single strand.

A gold-tone Cuban link anklet in 316L steel — the classic curb chain made to an ankle length, in a range of widths with an extension chain.

A gold-tone ankle chain in 316L steel — a plain link strand and a bead strand joined at one clasp, so it layers without two clasps.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.