Chain Bracelet Range
Four gold-tone 316L steel chain bracelets — hexagonal plates, oval rings, a stone-set ring chain and a flat curb, priced per design.
Stainless Steel Bracelets · Stainless Steel · MOQ 50 pcs
Line bracelet with five coloured stone stations
A fine line bracelet paved end to end with small round stones, broken at five points by a hanging coloured stone. Each drop is a different cut and a different shade, so the bracelet reads as a row of colour rather than a single sweep of white.
Overview
About this multi cz station bracelet
The construction is a line bracelet: a narrow, flat-topped band set with a continuous run of small round stones, each held in its own four-claw setting so the row stays flexible and follows the wrist. Five stations interrupt that run, spaced across the front of the bracelet, and each station carries a coloured stone on a short drop. The result is a piece that looks paved and even at a glance, then reads as five separate points of colour when the wrist moves.
The five drops are deliberately not a set of matching shapes: a square, an oval, a pear, a step-cut rectangle and a deeper-toned oval, in magenta, soft yellow, red-brown, pale green and deep brown. Each stone sits in a plain gold-tone bezel with no halo, so the cut and the colour do most of the work. The bracelet closes on a lobster clasp with an extension chain, and the finish is gold tone over 316L stainless steel — one design, quoted per piece.
- ✓Continuous paved row with five coloured drops spaced across the front
- ✓Five different cuts, so the colour reads as points, not a block
- ✓Plain bezels on the drops — the stone cut carries the design
- ✓Lobster clasp with extension chain, ordered to your length
Specification
What you are ordering
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Type | Bracelet — paved line chain with five hanging stone stations |
| Stones | Cubic zirconia: a continuous row of small round stones, plus five coloured drops |
| Drops | Square magenta, oval yellow, pear red-brown, step-cut pale green, oval deep brown |
| Finish | Gold tone (electroplated) over steel |
| Clasp | Lobster clasp with extension chain; length ordered to your market |
Variants
Configurations we build most often
Drop colours
The five shades are as shown; a different colour order or a single-shade version is quoted on request.
Finish — gold or steel tone
Gold tone (electroplated) as shown; steel tone quoted on request, plating per micron.
Length
Ordered to the length your market buys, with the extension chain as shown.
Materials
Materials and plating
| Option | What it means |
|---|---|
| 316L stainless steel | The band, settings, drops and clasp are 316L, so the piece does not tarnish and holds up to daily wear. |
| Cubic zirconia | Every stone here is cubic zirconia, a lab-grown stone and not a natural one; the row is small rounds, the drops are coloured fancy cuts. |
| Gold tone | Electroplated gold over steel; plating thickness is quoted per micron rather than published as a claim. |
316L
The grade, in plain terms
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Where this piece earns its keep
Bracelet walls
A paved line with colour drops sits between plain chains and stone-led cuffs.
Stacking
Narrow enough to wear beside a chain bracelet without crowding it.
Colour stories
Five shades on one piece let a small edit carry several colour directions.
Sizing
Sizes and how we set them
| Dimension | Guidance |
|---|---|
| B | |
| r | |
| a | |
| c | |
| e | |
| l | |
| e | |
| t | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| i | |
| s | |
| o | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| r | |
| a | |
| t | |
| h | |
| e | |
| r | |
| t | |
| h | |
| a | |
| n | |
| f | |
| i | |
| x | |
| e | |
| d | |
| , | |
| a | |
| n | |
| d | |
| t | |
| h | |
| e | |
| e | |
| x | |
| t | |
| e | |
| n | |
| s | |
| i | |
| o | |
| n | |
| c | |
| h | |
| a | |
| i | |
| n | |
| i | |
| s | |
| p | |
| a | |
| r | |
| t | |
| o | |
| f | |
| t | |
| h | |
| e | |
| f | |
| i | |
| t | |
| t | |
| i | |
| n | |
| g | |
| a | |
| s | |
| s | |
| h | |
| o | |
| w | |
| n | |
| . | |
| W | |
| e | |
| d | |
| o | |
| n | |
| o | |
| t | |
| p | |
| u | |
| b | |
| l | |
| i | |
| s | |
| h | |
| a | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| o | |
| r | |
| a | |
| w | |
| i | |
| d | |
| t | |
| h | |
| b | |
| e | |
| c | |
| a | |
| u | |
| s | |
| e | |
| n | |
| e | |
| i | |
| t | |
| h | |
| e | |
| r | |
| h | |
| a | |
| s | |
| b | |
| e | |
| e | |
| n | |
| m | |
| e | |
| a | |
| s | |
| u | |
| r | |
| e | |
| d | |
| o | |
| n | |
| a | |
| f | |
| i | |
| n | |
| i | |
| s | |
| h | |
| e | |
| d | |
| p | |
| i | |
| e | |
| c | |
| e | |
| & | |
| m | |
| d | |
| a | |
| s | |
| h | |
| ; | |
| t | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| y | |
| o | |
| u | |
| s | |
| e | |
| l | |
| l | |
| a | |
| n | |
| d | |
| w | |
| e | |
| q | |
| u | |
| o | |
| t | |
| e | |
| t | |
| o | |
| i | |
| t | |
| . |
Price list
Quote a multi cz station bracelet
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Questions about this multi cz station bracelet
Is the whole bracelet set with stones?
The band is paved in a continuous row of small round cubic zirconia, each in a four-claw setting. Five points along the front carry a coloured drop stone instead, so the row is interrupted rather than uniform.
Are the coloured stones natural?
No. Every stone is cubic zirconia, a lab-grown stone, including the five coloured drops. The colours are stable from piece to piece, which is why we can match a reorder to the sample.
Can I order one drop colour across the whole bracelet?
Yes. The five shades shown are the standard mix; a single-shade version, or a different order of colours, is quoted as its own line so you can compare it with the mixed one.
Can I add my own branding?
Laser marking is available on request, placed on the clasp area. See the private label page for placement and minimums.
Are you a manufacturer or a trading company?
We are a China-based B2B fashion jewellery supplier with our own design, sourcing and quality-control team, and we do not own a factory. The benches your order runs on belong to partner production lines in Guangdong that we work with directly and visit during your production. We publish no factory address, floor area, headcount or founding year, because those numbers describe a plant rather than the service you are buying. Ask any supplier this question, and check whether the answer matches the paperwork you get.
Keep looking
Other pieces in this range
Multi-Stone Cabochon Bracelet
Cabochon natural stones in red, brown, blue, green and black, each framed in gold tone, with flower-shaped white stone accents along the chain.
CZ Stud Earring Range
Nine pairs of cubic zirconia studs in 18K gold PVD over 316L steel — clusters, fans, butterfly and drop shapes; quoted per design.
Huggie Hoop Earrings
316L stainless steel huggie hoops that hug the lobe. Tarnish-free, waterproof and light enough for all-day wear, with a hinge that keeps its snap.
More in this series
Other bracelets in stainless steel
Blue Stone Station Bracelet
Fine gold-tone chain bracelets in 316L steel with small blue stones set at intervals, plus a short drop charm.
Coloured Glass Station Bracelets
Gold-tone 316L steel chain bracelets set with coloured glass stations shown in pink, blue and green, with a plain polished gold pebble style.
Multi-Colour Stone Bracelet
A 316L steel bracelet range of bezel-set cubic zirconia — round stones and heart-shaped stones in clear, green, pink and mixed-colour runs.
Acrylic Block Bangle
A gold-tone bangle of four curved acrylic blocks joined by metal connectors, in four colourways — an acrylic body, not plated steel.
Bangle Range: Engraved and Resin
A three-design bangle range in gold tone — an engraved solid steel bangle and two wide resin bangles set with cabochons; quoted per design.
Bead Charm Bracelets
Stone-bead charm bracelets in 316L steel — cream, teal and blue strands, each finished with a cubic zirconia-set charm.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.