
Resin Stone Twist Bangle
A gold-tone 316L steel twisted-rope cuff bracelet, open at the front and set with two resin stones, in amber or black.
Stainless Steel Bracelets · Stainless Steel · MOQ 50 pcs
A hard bangle made of four curved acrylic blocks, each one polished to a soft gloss, with three gold-tone metal connectors between them. The blocks carry the colour — ivory, dark green, grass green or tortoise brown — and the metal shows only at the joints, so the bangle reads as broad colour with gold only where the blocks meet. The body is acrylic, not steel.



Overview
The bangle is built as a circle of four curved blocks rather than one moulded ring, which is what gives it the banded look: each block is polished on the outside and meets the next at a gold-tone connector. Three connectors run round the circle, one of them worked as a ribbed coil that sits at the top of the wrist. The blocks are cut wide enough to show the colour as a broad band, and the tortoise colourway carries a patterned cast rather than a flat tone.
The material point matters more than usual here: the four blocks are acrylic, and the acrylic is the body of the bangle. This is not a steel bangle with a resin inlay and it is not plated steel. The metal is limited to the three connectors, and where metal is used it is 316L stainless steel under a gold tone plating. The acrylic keeps the piece light on the wrist and warm to the touch, and the polished face takes colour more deeply than a plated surface does.
Specification
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Design | One bangle, four colourways; quoted per colourway |
| Body | Four curved acrylic blocks, polished; acrylic is the body, not steel |
| Joints | Three gold-tone metal connectors, one worked as a ribbed coil |
| Finish | Gold tone (electroplated) on the metal parts; acrylic cast in colour |
| Form | Hard bangle, no clasp, worn slipped over the hand |
Variants
Ivory, dark green, grass green or tortoise brown; each is quoted as its own line.
Gold tone (electroplated) as shown; steel tone connectors quoted on request, plating per micron.
Ordered to the inner diameter you sell; the four-block layout is fixed.
Materials
| Option | What it means |
|---|---|
| Acrylic | The four blocks are acrylic, cast in colour and polished, and they are the body of the bangle. On the tortoise colourway the pattern is cast into the material, so it varies piece to piece rather than repeating exactly. |
| 316L stainless steel | The three connectors are 316L stainless steel, a marine-grade alloy with molybdenum at roughly 2-3% and chromium at 16-18%, which is why the metal parts do not tarnish. The steel is in the joints only, not in the body. |
| Gold tone (electroplated) | The gold is an electroplated gold tone over the steel connectors, not a PVD bond; plating thickness is quoted per micron. |
316L
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Four colourways of one shape fill a display with colour rather than with metal.
A light acrylic body suits warm-weather selling and packs without weight.
The block-and-connector construction gives a graphic look at a low metal weight.
Sizing
| Dimension | Guidance |
|---|---|
| A | |
| h | |
| a | |
| r | |
| d | |
| b | |
| a | |
| n | |
| g | |
| l | |
| e | |
| w | |
| i | |
| t | |
| h | |
| n | |
| o | |
| c | |
| l | |
| a | |
| s | |
| p | |
| , | |
| s | |
| o | |
| f | |
| i | |
| t | |
| i | |
| s | |
| t | |
| h | |
| e | |
| i | |
| n | |
| n | |
| e | |
| r | |
| d | |
| i | |
| a | |
| m | |
| e | |
| t | |
| e | |
| r | |
| : | |
| i | |
| t | |
| i | |
| s | |
| o | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| t | |
| h | |
| e | |
| s | |
| i | |
| z | |
| e | |
| y | |
| o | |
| u | |
| s | |
| e | |
| l | |
| l | |
| a | |
| n | |
| d | |
| s | |
| l | |
| i | |
| p | |
| p | |
| e | |
| d | |
| o | |
| v | |
| e | |
| r | |
| t | |
| h | |
| e | |
| h | |
| a | |
| n | |
| d | |
| . | |
| T | |
| h | |
| e | |
| f | |
| o | |
| u | |
| r | |
| - | |
| b | |
| l | |
| o | |
| c | |
| k | |
| l | |
| a | |
| y | |
| o | |
| u | |
| t | |
| i | |
| s | |
| f | |
| i | |
| x | |
| e | |
| d | |
| , | |
| s | |
| o | |
| t | |
| h | |
| e | |
| d | |
| i | |
| a | |
| m | |
| e | |
| t | |
| e | |
| r | |
| c | |
| o | |
| m | |
| e | |
| s | |
| f | |
| r | |
| o | |
| m | |
| t | |
| h | |
| e | |
| b | |
| l | |
| o | |
| c | |
| k | |
| t | |
| h | |
| i | |
| c | |
| k | |
| n | |
| e | |
| s | |
| s | |
| r | |
| a | |
| t | |
| h | |
| e | |
| r | |
| t | |
| h | |
| a | |
| n | |
| f | |
| r | |
| o | |
| m | |
| a | |
| l | |
| i | |
| n | |
| k | |
| c | |
| o | |
| u | |
| n | |
| t | |
| . | |
| S | |
| e | |
| n | |
| d | |
| u | |
| s | |
| t | |
| h | |
| e | |
| i | |
| n | |
| n | |
| e | |
| r | |
| d | |
| i | |
| a | |
| m | |
| e | |
| t | |
| e | |
| r | |
| s | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| b | |
| u | |
| y | |
| s | |
| a | |
| n | |
| d | |
| w | |
| e | |
| q | |
| u | |
| o | |
| t | |
| e | |
| p | |
| e | |
| r | |
| s | |
| i | |
| z | |
| e | |
| , | |
| p | |
| e | |
| r | |
| c | |
| o | |
| l | |
| o | |
| u | |
| r | |
| w | |
| a | |
| y | |
| . |
Price list
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Keep looking

A gold-tone 316L steel twisted-rope cuff bracelet, open at the front and set with two resin stones, in amber or black.

Nine gold-tone 316L steel bangle designs — open cuffs and hinged bangles, in green stone, cubic zirconia, textured and plain versions.

A slim band folded into a stepped zigzag, open at the ends — an all-metal open cuff in 316L steel, with no stone setting.

A fine-wire open bangle set with pearls and clear cubic zirconia on spring-style adjustable ends — one cuff covers a range of wrists.
More in this series

A three-design bangle range in gold tone — an engraved solid steel bangle and two wide resin bangles set with cabochons; quoted per design.

A slim gold-tone 316L steel bangle with channel-set rectangular stones, in a green-stone version and a clear cubic-zirconia version made to stack.

A hinged 316L stainless steel bangle with a concealed clasp. It slips on one-handed, closes to a clean line, and takes engraving inside the band. Waterproof and tarnish-free.

Stone-bead charm bracelets in 316L steel — cream, teal and blue strands, each finished with a cubic zirconia-set charm.

A 316L stainless steel beaded ball bracelet in a warm gold tone. Polished spheres catch the light without any stones, the row stays bright with no tarnish, and it works as a standalone piece or a layering one.

A gold-tone link bracelet set at intervals with teardrop stone cabochons — blue or warm-toned, 316L steel.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.