Coloured CZ Stone Ring, Nine Cuts
One large coloured cubic zirconia per ring on a thin band, with small stones on the shoulders — nine colour and cut options.
Stainless Steel Rings · Stainless Steel · MOQ 50 pcs
Coloured CZ wide band ring, a full circle of stones
A wide band ring in 316L stainless steel, its outer edge shaped into soft waves and its face set all the way round with round coloured cubic zirconia. A full-circle stone ring, in gold tone.
Overview
About this coloured cz wide band ring
This is a single wide band rather than a thin stacking ring. The outer edge is shaped into a soft wave, so the profile is not a flat rectangle, and the face carries a full circle of round cubic zirconia, each held in its own bezel rather than a shared channel. The stones run clear, pink, lavender and olive tones in the sample, so the band reads as coloured rather than a plain white-stone eternity ring. It is set all the way round, so there is no bare underside when the hand turns.
The stones are cubic zirconia, not a natural stone, so the shade and size stay even across a run and the price is predictable. It sits between a plain band and a full diamond eternity ring, which suits a market that wants the look of a stone band without a natural stone. Gold tone is the finish shown; steel tone is quoted on request, so the band can sit beside a plain steel range.
- ✓Wide band with a waved edge — not a thin stacking ring
- ✓Round cubic zirconia bezel-set all the way round
- ✓Coloured stones, not a natural stone, so tone stays even
- ✓Gold tone as shown; steel tone quoted on request
Specification
What you are ordering
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Type | Wide band ring |
| Edge | Outer edge shaped into a soft wave |
| Setting | Round cubic zirconia, bezel-set all the way round |
| Stones | Cubic zirconia, not a natural stone; coloured tones |
| Finishes | Gold tone (electroplated) as shown; steel tone quoted on request |
Variants
Configurations we build most often
Stone tones
Mixed coloured cubic zirconia as shown; tell us the tones you want and we quote per run.
Finish
Gold tone (electroplated) as shown; steel tone quoted on request.
Ring size
Ordered to your size; tell us the sizes you sell and we quote per size.
Materials
Materials and plating
| Option | What it means |
|---|---|
| 316L stainless steel | The band is 316L, so it does not tarnish and is safe for daily wear. |
| Cubic zirconia | The stones are cubic zirconia, not a natural stone, so colour and size stay even across a run. |
| Gold tone | Electroplated gold over steel; plating thickness is quoted per micron. |
316L
The grade, in plain terms
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Where this piece earns its keep
Eternity-band buyers
A full-circle stone band for a market that wants the look without a natural stone.
Colour-led edits
Mixed coloured stones sit apart from a plain white-stone range.
Everyday wear
316L and cubic zirconia suit a band worn daily.
Sizing
Sizes and how we set them
| Dimension | Guidance |
|---|---|
| W | |
| e | |
| d | |
| o | |
| n | |
| o | |
| t | |
| p | |
| u | |
| b | |
| l | |
| i | |
| s | |
| h | |
| a | |
| r | |
| i | |
| n | |
| g | |
| s | |
| i | |
| z | |
| e | |
| f | |
| r | |
| o | |
| m | |
| t | |
| h | |
| e | |
| s | |
| a | |
| m | |
| p | |
| l | |
| e | |
| . | |
| T | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| s | |
| i | |
| z | |
| e | |
| s | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| b | |
| u | |
| y | |
| s | |
| a | |
| n | |
| d | |
| w | |
| e | |
| q | |
| u | |
| o | |
| t | |
| e | |
| p | |
| e | |
| r | |
| s | |
| i | |
| z | |
| e | |
| ; | |
| a | |
| s | |
| a | |
| m | |
| p | |
| l | |
| e | |
| c | |
| o | |
| n | |
| f | |
| i | |
| r | |
| m | |
| s | |
| t | |
| h | |
| e | |
| f | |
| i | |
| t | |
| a | |
| n | |
| d | |
| t | |
| h | |
| e | |
| b | |
| a | |
| n | |
| d | |
| w | |
| i | |
| d | |
| t | |
| h | |
| b | |
| e | |
| f | |
| o | |
| r | |
| e | |
| t | |
| h | |
| e | |
| r | |
| u | |
| n | |
| . |
Price list
Quote a coloured cz wide band ring
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Questions about this coloured cz wide band ring
Is the stone a real gemstone?
No. The stones are cubic zirconia, not a natural stone, and they are round stones set all the way round the band rather than a single large centre stone.
Is this a stacking ring?
No. It is a wide band, not a thin stack ring, so it is worn on its own; the outer edge is shaped into a soft wave rather than a flat rectangle.
Can I choose the stone colours?
The sample mixes clear, pink, lavender and olive tones. Tell us the tones you want and we will quote per run; cubic zirconia keeps the shade even across the order.
Can I get it in steel tone?
Yes. Gold tone (electroplated) is shown; steel tone is quoted on request. See the private label page for finish and marking options.
Are you a manufacturer or a trading company?
We are a China-based B2B fashion jewellery supplier with our own design, sourcing and quality-control team, and we do not own a factory. The benches your order runs on belong to partner production lines in Guangdong that we work with directly and visit during your production. We publish no factory address, floor area, headcount or founding year, because those numbers describe a plant rather than the service you are buying. Ask any supplier this question, and check whether the answer matches the paperwork you get.
Keep looking
Other pieces in this range
Wide Multi-Row CZ Band Ring
A wide multi-row cubic zirconia band in gold-tone 316L steel — four CZ bands in different stone cuts that stack into one bold look.
More in this series
Other rings in stainless steel
Open Wide Band Ring
A gold-tone 316L steel wide band ring with an open, saddle-shaped face and a mirror polish — bold across the top, slim at the back, made to wear alone or stacked.
Baguette & CZ Band Rings
Gold-tone 316L steel bands with cubic zirconia — a wishbone band, a channel-set baguette band and a spaced round-stone band, in a three-style family.
Cable-Texture Band Ring
A cable-texture 316L stainless steel band ring. The twisted face scatters light, hides the marks daily wear leaves behind, and needs no stones and no upkeep.
Coloured CZ Open Ring
Gold-tone 316L steel open ring with twin clusters of coloured cubic zirconia on a brushed face — several colourways.
CZ Band and Cluster Ring
Rows and clusters of small cubic zirconia across wide bands, in stackable and chevron designs — eight options.
Resin Pavé Band Rings
Band rings with a solid cast resin body in green, white or amber, each set with a gold-tone 316L steel strip of cubic zirconia. The band is resin, not metal.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.