316L Signet Ring
Solid 316L stainless steel signet with a flat face for engraving. Steel holds a sharper mark than silver, never tarnishes and never turns skin green — the version of a signet that survives daily wear.
Stainless Steel Rings · Stainless Steel · MOQ 50 pcs
Watch-band and stone rings, eight designs
Rings built on a watch-bracelet look: a link band, stepped and articulated, carrying a single centre. The range sets an oval stone, a coloured stone and a heart on that band, adds a plain signet plate, and finishes with a shell-pearl flower and a cubic zirconia cluster. Eight designs are shown, each quoted on its own.
Overview
About this watch-band & stone ring range
The range is built the way a watch bracelet is: a link band with the links stepped and articulated, so it sits flat across the finger and has a mechanical, panelled look rather than a plain round shank. Each design carries one centre on that band — a bezel-set oval stone, a rectangular coloured stone, a clear stone, a puffy heart, a heart outlined in cubic zirconia on a steel-tone band, and a plain rectangular signet plate that takes no stone at all. Two further designs move off the link band: a flower set with shell pearls and a coloured centre, and a four-stone cubic zirconia cluster.
Because the band is the constant, the range displays as a family even though the centres differ, which makes it easy to tell one story around a single link. The stones are cubic zirconia rather than natural stones, and the white petals are shell pearl, an imitation, so colour and size stay even across a run and nothing depends on a natural stone supply. Selected designs are shown in steel tone against the gold tone of the rest. Each design is quoted as its own line, and the plating method and its thickness are confirmed at quote.
- ✓Eight designs on a watch-bracelet style link band
- ✓Stone, heart, signet, shell pearl and cubic zirconia centres
- ✓Stones are cubic zirconia; the petals are shell pearl, not a natural pearl
- ✓Gold tone as shown, with selected designs in steel tone
Specification
What you are ordering
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Range | Eight designs in one listing — quoted per style |
| Band | A watch-bracelet style link band on the link rings; the two cluster designs use a plain band |
| Centres | Stone cabochon, coloured stone, clear stone, heart, cubic zirconia heart and a plain signet plate |
| Clusters | A shell-pearl flower with a coloured centre and a four-stone cubic zirconia cluster |
| Finish | Gold tone as shown, with selected designs in steel tone; plating quoted on request |
Variants
Configurations we build most often
Design
Choose any of the eight; each is quoted as its own line, so mixed orders are fine.
Finish — gold or steel tone
Gold tone as shown, with selected designs in steel tone; other finishes quoted on request.
Centre & stone colour
The stone centres are held as shown; a specific stone colour or a different centre is quoted on request.
Materials
Materials and plating
| Option | What it means |
|---|---|
| 316L stainless steel | The link band and the plain bands are 316L, so the rings do not tarnish and take daily wear. |
| Cubic zirconia and shell pearl | The stones are cubic zirconia, not natural stones, and the white petals are shell pearl, an imitation rather than a natural pearl. |
| Gold tone | Gold tone over steel as shown, with selected designs in plain steel tone; the plating method and thickness are quoted rather than fixed here. |
316L
The grade, in plain terms
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Where this piece earns its keep
Statement fingers
The panelled link band makes a bold single-ring look rather than a fine one.
Gift and novelty
The hearts, the flower and the signet plate give the range an easy gift angle.
Range building
Order depth on the heart and stone designs and singles on the rest to test the link band.
Sizing
Sizes and how we set them
| Dimension | Guidance |
|---|---|
| T | |
| h | |
| e | |
| l | |
| i | |
| n | |
| k | |
| b | |
| a | |
| n | |
| d | |
| i | |
| s | |
| o | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| y | |
| o | |
| u | |
| r | |
| o | |
| w | |
| n | |
| s | |
| i | |
| z | |
| e | |
| c | |
| h | |
| a | |
| r | |
| t | |
| ; | |
| b | |
| e | |
| c | |
| a | |
| u | |
| s | |
| e | |
| t | |
| h | |
| e | |
| b | |
| a | |
| n | |
| d | |
| i | |
| s | |
| a | |
| r | |
| t | |
| i | |
| c | |
| u | |
| l | |
| a | |
| t | |
| e | |
| d | |
| , | |
| i | |
| t | |
| i | |
| s | |
| q | |
| u | |
| o | |
| t | |
| e | |
| d | |
| t | |
| o | |
| t | |
| h | |
| e | |
| s | |
| i | |
| z | |
| e | |
| y | |
| o | |
| u | |
| s | |
| e | |
| l | |
| l | |
| r | |
| a | |
| t | |
| h | |
| e | |
| r | |
| t | |
| h | |
| a | |
| n | |
| t | |
| o | |
| a | |
| f | |
| i | |
| x | |
| e | |
| d | |
| l | |
| i | |
| n | |
| k | |
| c | |
| o | |
| u | |
| n | |
| t | |
| . | |
| T | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| s | |
| i | |
| z | |
| e | |
| s | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| b | |
| u | |
| y | |
| s | |
| a | |
| n | |
| d | |
| w | |
| e | |
| w | |
| i | |
| l | |
| l | |
| q | |
| u | |
| o | |
| t | |
| e | |
| p | |
| e | |
| r | |
| s | |
| i | |
| z | |
| e | |
| . |
Price list
Quote a watch-band & stone ring range
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Questions about this watch-band & stone ring range
How many designs are in the range?
Eight are shown, most of them set on the same watch-bracelet style link band with a different centre, plus a shell-pearl flower and a cubic zirconia cluster. Each is quoted as its own line.
Is the link band the same on every ring?
The link rings share the band; the plain signet plate uses the same band without a stone, and the two cluster designs use a plain band. That is what lets the range display as a family.
What are the white petals and the stones?
The petals are shell pearl, an imitation rather than a natural pearl, and the stones are cubic zirconia, not natural stones, so colour and size stay even across a run.
Are there steel-tone designs as well as gold?
Yes. Gold tone is shown on most of the range and selected designs are in plain steel tone; other finishes are quoted on request. See the private label page.
Are you a manufacturer or a trading company?
We are a China-based B2B fashion jewellery supplier with our own design, sourcing and quality-control team, and we do not own a factory. The benches your order runs on belong to partner production lines in Guangdong that we work with directly and visit during your production. We publish no factory address, floor area, headcount or founding year, because those numbers describe a plant rather than the service you are buying. Ask any supplier this question, and check whether the answer matches the paperwork you get.
Keep looking
Other pieces in this range
Stone Ring Stack
Gold-toned steel rings set with stone cabochons — dome, rope and open bands, sold as a stack and quoted per piece.
More in this series
Other rings in stainless steel
Cabochon Stone Ring Range
Four cabochon rings in 18K gold PVD over 316L steel — oval, round and marquise stones in plain bezels, edged with clear stones; quoted per design.
Large Stone Ring Range
Two gold-tone 316L steel rings with large cubic zirconia — a lone long oval, and a two-stone cushion-and-oval band.
Natural Stone Bead Ring Range
Three gold-tone rings on a bead-strung shank, each with three bezel-set stones at an open top — green striated, brown with cream, or blue with mint.
Resin Stone Twist Ring Range
A gold-tone 316L steel rope-twist ring set with three resin stones, in amber, black or turquoise-blue colourways.
Single Stone Ring Range
Seven gold-tone 316L steel single-stone rings, set with cubic zirconia in green, clear, blue and champagne cuts. A range, quoted per design.
Assorted CZ Ring Range
A gold-tone 316L steel open ring range set with cubic zirconia — several centre shapes, each framed by teardrop stones, quoted per design.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.