
Paperclip Link Chain Bracelet
Paperclip-link chains in steel and gold tone, cut to the length you sell — bracelet or short necklace.
Stainless Steel Bracelets · Stainless Steel · MOQ 50 pcs
This is a range, not one bracelet: four link constructions under a single brief, quoted per design. Two alternate a long link with a twisted rope segment, one pairs oval links with rope knots, and one takes a ring and a twist and runs it heavier. Each closes on a lobster clasp with a short extension, and each is 316L stainless steel.



Overview
This is a range, not one piece. All four bracelets are built from the same two ideas — a smooth link and a twisted rope segment — arranged differently, so a display can carry one metal story across four price points without four unrelated designs. The first alternates a long paperclip link with a twisted rope section, which gives a stretched, architectural line. The second sets oval links against rope knots, so the chain reads as a series of soft loops rather than a flat run.
The third repeats a ring and a twist at a medium weight, where the round link and the rope sit closer together and the chain looks denser. The fourth takes that same construction and runs it heavier, with wider links, for a piece that sits like a cuff chain rather than a fine bracelet. One of the four is finished in steel tone instead of gold tone, so a stockist can offer the same construction in both metals. Every design is quoted per piece and per design, and lengths are ordered to your market.
Specification
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Type | Chain bracelet range; four designs, quoted per design |
| Designs | Paperclip links with twist; oval links with rope knots; rings with twist; the last three at a heavier weight |
| Stones | None — all-metal construction, no settings |
| Finish | Gold tone (electroplated) over steel; one design in steel tone |
| Clasp | Lobster clasp with a short extension chain; jump-ring ends |
Variants
Paperclip with twist, oval with rope knots, ring with twist, or the heavier cut; each quoted as its own line.
Gold tone (electroplated) as shown on three designs; the fourth runs in steel tone, plating quoted per micron.
Ordered to the wrist size your market buys, with the extension as specified.
Materials
| Option | What it means |
|---|---|
| 316L stainless steel | Every link, rope segment, clasp and jump ring is 316L, so the bracelet does not rust and holds a polish in daily wear. |
| Gold tone | Electroplated gold over steel on the gold designs; plating thickness is not fixed by the design and is quoted per micron. |
| Steel tone | One design is left unplated in polished steel, which is the finish that lasts longest of the four. |
316L
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Four weights and link types let one metal story fill a wall at several price points.
The lighter designs stack with a watch or a second chain; the heavy cut wears alone.
The steel-tone design sits beside the gold ones, so one order covers both finishes.
Sizing
| Dimension | Guidance |
|---|---|
| E | |
| v | |
| e | |
| r | |
| y | |
| d | |
| e | |
| s | |
| i | |
| g | |
| n | |
| i | |
| s | |
| o | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| t | |
| h | |
| e | |
| w | |
| r | |
| i | |
| s | |
| t | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| y | |
| o | |
| u | |
| r | |
| m | |
| a | |
| r | |
| k | |
| e | |
| t | |
| b | |
| u | |
| y | |
| s | |
| , | |
| a | |
| n | |
| d | |
| t | |
| h | |
| e | |
| e | |
| x | |
| t | |
| e | |
| n | |
| s | |
| i | |
| o | |
| n | |
| c | |
| h | |
| a | |
| i | |
| n | |
| i | |
| s | |
| s | |
| p | |
| e | |
| c | |
| i | |
| f | |
| i | |
| e | |
| d | |
| w | |
| i | |
| t | |
| h | |
| t | |
| h | |
| e | |
| o | |
| r | |
| d | |
| e | |
| r | |
| r | |
| a | |
| t | |
| h | |
| e | |
| r | |
| t | |
| h | |
| a | |
| n | |
| f | |
| i | |
| x | |
| e | |
| d | |
| b | |
| y | |
| u | |
| s | |
| . | |
| B | |
| e | |
| c | |
| a | |
| u | |
| s | |
| e | |
| t | |
| h | |
| e | |
| f | |
| o | |
| u | |
| r | |
| d | |
| e | |
| s | |
| i | |
| g | |
| n | |
| s | |
| d | |
| i | |
| f | |
| f | |
| e | |
| r | |
| i | |
| n | |
| l | |
| i | |
| n | |
| k | |
| w | |
| i | |
| d | |
| t | |
| h | |
| a | |
| n | |
| d | |
| w | |
| e | |
| i | |
| g | |
| h | |
| t | |
| , | |
| a | |
| s | |
| i | |
| n | |
| g | |
| l | |
| e | |
| l | |
| e | |
| n | |
| g | |
| t | |
| h | |
| f | |
| i | |
| g | |
| u | |
| r | |
| e | |
| w | |
| o | |
| u | |
| l | |
| d | |
| n | |
| o | |
| t | |
| d | |
| e | |
| s | |
| c | |
| r | |
| i | |
| b | |
| e | |
| t | |
| h | |
| e | |
| m | |
| a | |
| l | |
| l | |
| ; | |
| a | |
| s | |
| k | |
| a | |
| n | |
| d | |
| w | |
| e | |
| c | |
| o | |
| n | |
| f | |
| i | |
| r | |
| m | |
| t | |
| h | |
| e | |
| w | |
| e | |
| i | |
| g | |
| h | |
| t | |
| a | |
| n | |
| d | |
| l | |
| i | |
| n | |
| k | |
| c | |
| o | |
| u | |
| n | |
| t | |
| o | |
| f | |
| t | |
| h | |
| e | |
| d | |
| e | |
| s | |
| i | |
| g | |
| n | |
| s | |
| y | |
| o | |
| u | |
| a | |
| r | |
| e | |
| c | |
| o | |
| n | |
| s | |
| i | |
| d | |
| e | |
| r | |
| i | |
| n | |
| g | |
| . |
Price list
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Keep looking

Paperclip-link chains in steel and gold tone, cut to the length you sell — bracelet or short necklace.

A solid 316L stainless steel Cuban link bracelet, 5–12 mm. Waterproof, tarnish-free and heavy — a men's bracelet with the links soldered closed so it survives the wrist.

A two-tone 316L steel bracelet — fine silver-tone chain, a gold-tone centre bar of cubic zirconia pavé, and a gold-tone clasp and extension.

A bracelet stack mixing steel, resin and coloured stone beads — several pieces per listing, quoted per piece.
More in this series

Four gold-tone 316L steel chain bracelets — hexagonal plates, oval rings, a stone-set ring chain and a flat curb, priced per design.

316L steel hand chains — a ring at the finger joined by chain across the back of the hand to a wrist chain, with imitation pearl or cubic zirconia stations.

A three-design bangle range in gold tone — an engraved solid steel bangle and two wide resin bangles set with cabochons; quoted per design.

A gold-tone link bracelet set at intervals with teardrop stone cabochons — blue or warm-toned, 316L steel.

Four gold-tone bracelets in one family — rigid cuff and wide band by diameter, twisted and oval-link chains by length.

Five open oval links in gold-tone 316L steel, joined by rhinestone-set bars and closed with a fold-over clasp.
Get the price list
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
Price list
Two minutes to fill in. No design file needed to start.