Stacked Band Ring Set
A set of three to four stacking bands with small round stones — one look, worn together, in five combinations.
Stainless Steel Rings · Stainless Steel · MOQ 50 pcs
Coil multi-layer ring, three versions
A coil that wraps the finger in layer upon layer, mixing gold tone and steel tone bands — some smooth, some beaded, some with a rope twist — and crossed by a formed paper-clip motif. Three versions are shown: the plain paper-clip coil, a coil with a row of round cubic zirconia, and one with spaced octagonal cubic zirconia.
Overview
About this coil multi-layer ring
This is a coil rather than a flat band: several layers of 316L steel wrap the finger and sit on top of one another, so the ring reads as a stack that is made in one piece. The layers mix finishes — a polished gold-tone band against a steel-tone band — and textures, from smooth to beaded to a rope twist, so the coil catches the light at different angles. A formed paper-clip motif crosses the coil at the front, and that motif is the signature of the design.
Three versions are shown, all on the same coil body: the plain paper-clip coil, a version with a full row of round cubic zirconia along one layer, and a version with spaced octagonal cubic zirconia. The stones are cubic zirconia rather than a natural stone, so colour and size stay even across a run, and the layered shank takes up more of a size range than a closed band. Each version is quoted as its own line; the plating method and its thickness are confirmed at quote.
- ✓A single coil that wraps the finger in several layers
- ✓Gold tone and steel tone layers mixed in every coil
- ✓Three versions: plain paper-clip, round CZ and octagonal CZ
- ✓Cubic zirconia, not a natural stone, so colour stays even
Specification
What you are ordering
| Item | Detail |
|---|---|
| Material | 316L stainless steel |
| Construction | A coil that wraps the finger in several layers, made in one piece |
| Versions | Three — plain paper-clip coil, round cubic zirconia coil and octagonal cubic zirconia coil |
| Layer mix | Polished, beaded and rope-textured bands in gold tone and steel tone |
| Motif | A formed paper-clip motif crossing the front of the coil |
| Finish | Gold tone and steel tone as shown; plating quoted on request |
Variants
Configurations we build most often
Version
Plain paper-clip, round cubic zirconia or octagonal cubic zirconia; each is quoted as its own line.
Size
The layered shank is ordered to your size chart; tell us the sizes you sell and we quote per size.
Finish
The gold tone and steel tone mix is shown as standard; plating and thickness are confirmed at quote.
Materials
Materials and plating
| Option | What it means |
|---|---|
| 316L stainless steel | The coil is 316L, so it does not tarnish and takes daily wear. |
| Cubic zirconia | The stone versions use cubic zirconia, not a natural stone, so the colour stays even across a run. |
| Gold tone and steel tone | The layers mix a gold tone over steel with plain steel tone; the plating method and thickness are quoted rather than fixed here. |
316L
The grade, in plain terms
Every design on this page is made in 316L stainless steel — the molybdenum-bearing austenitic grade, and the same grade specified for surgical implants and marine fittings. The “L” is low carbon, which is what keeps chain links and hollow forms sound at the joins.
Grades are worth stating rather than implying, because 316L, 304 and 201 look identical in a photograph and differ by real money per tonne. We name the grade on every design. If your market needs documentation with the goods, tell us and we will confirm what is available on this design before you order.
| Property | 316L stainless steel |
|---|---|
| Designation | 316L (AISI/ASTM) · SUS316L under JIS · 1.4404 under EN |
| Composition | Chromium 16–18%, nickel 10–14%, molybdenum 2–3%, carbon 0.03% max |
| Why 316L and not 304 or 201 | Molybdenum is what resists chlorides, and neither of the cheaper grades contains any |
| Tarnish and rust | Does not tarnish, and does not rust from everyday wear, sweat or water |
| Skin | Hypoallergenic for most wearers, and not nickel-free — it contains 10–14% nickel by specification |
| Specified for | Surgical implants (ASTM F138) and marine fittings, which is where the “surgical” and “marine grade” labels come from |
Best for
Where this piece earns its keep
Layered fingers
The coil gives the density of a stack without separate rings slipping apart.
Everyday and evening
The plain coil suits daily wear, while the stone versions dress the look up.
Display depth
Three versions on one coil body make a compact in-case display.
Sizing
Sizes and how we set them
| Dimension | Guidance |
|---|---|
| T | |
| h | |
| e | |
| c | |
| o | |
| i | |
| l | |
| w | |
| r | |
| a | |
| p | |
| s | |
| t | |
| h | |
| e | |
| f | |
| i | |
| n | |
| g | |
| e | |
| r | |
| i | |
| n | |
| s | |
| e | |
| v | |
| e | |
| r | |
| a | |
| l | |
| l | |
| a | |
| y | |
| e | |
| r | |
| s | |
| , | |
| s | |
| o | |
| i | |
| t | |
| t | |
| a | |
| k | |
| e | |
| s | |
| u | |
| p | |
| m | |
| o | |
| r | |
| e | |
| o | |
| f | |
| a | |
| s | |
| i | |
| z | |
| e | |
| r | |
| a | |
| n | |
| g | |
| e | |
| t | |
| h | |
| a | |
| n | |
| a | |
| f | |
| l | |
| a | |
| t | |
| b | |
| a | |
| n | |
| d | |
| ; | |
| t | |
| h | |
| e | |
| r | |
| i | |
| n | |
| g | |
| i | |
| s | |
| o | |
| r | |
| d | |
| e | |
| r | |
| e | |
| d | |
| t | |
| o | |
| y | |
| o | |
| u | |
| r | |
| o | |
| w | |
| n | |
| s | |
| i | |
| z | |
| e | |
| c | |
| h | |
| a | |
| r | |
| t | |
| r | |
| a | |
| t | |
| h | |
| e | |
| r | |
| t | |
| h | |
| a | |
| n | |
| a | |
| f | |
| i | |
| x | |
| e | |
| d | |
| s | |
| i | |
| z | |
| e | |
| l | |
| i | |
| s | |
| t | |
| . | |
| T | |
| e | |
| l | |
| l | |
| u | |
| s | |
| t | |
| h | |
| e | |
| s | |
| i | |
| z | |
| e | |
| s | |
| y | |
| o | |
| u | |
| s | |
| e | |
| l | |
| l | |
| a | |
| n | |
| d | |
| w | |
| e | |
| w | |
| i | |
| l | |
| l | |
| q | |
| u | |
| o | |
| t | |
| e | |
| p | |
| e | |
| r | |
| s | |
| i | |
| z | |
| e | |
| . |
Price list
Quote a coil multi-layer ring
Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
FAQ
Questions about this coil multi-layer ring
How many layers does the coil have?
Enough that the ring reads as a stack rather than a single band, with the layers sitting on top of one another and a paper-clip motif crossing the front. Three versions share that coil body.
Is the coil adjustable?
The layered, open shank takes up more of a size range than a closed band, and it is ordered to your size chart. Tell us the sizes you sell and we quote per size.
What are the stones?
The stone versions use cubic zirconia, not a natural stone, either as a full round row or as spaced octagonal stones. Colour stays even across a run.
Are the two tones plated the same way?
The layers mix gold tone and steel tone as shown. The plating method and its thickness are quoted rather than stated here; see the private label page.
Are you a manufacturer or a trading company?
We are a China-based B2B fashion jewellery supplier with our own design, sourcing and quality-control team, and we do not own a factory. The benches your order runs on belong to partner production lines in Guangdong that we work with directly and visit during your production. We publish no factory address, floor area, headcount or founding year, because those numbers describe a plant rather than the service you are buying. Ask any supplier this question, and check whether the answer matches the paperwork you get.
Keep looking
Other pieces in this range
Adjustable Open Ring, Mixed Designs
Open-band ring family: no sizing, no wrong-size returns, in gold-toned and steel finishes.
More in this series
Other rings in stainless steel
Multi-Stone Open Ring
Open-band rings set with three to four coloured cabochons — green, turquoise, red and deep blue looks, in steel and gold tone.
Assorted CZ Ring Range
A gold-tone 316L steel open ring range set with cubic zirconia — several centre shapes, each framed by teardrop stones, quoted per design.
Baguette & CZ Band Rings
Gold-tone 316L steel bands with cubic zirconia — a wishbone band, a channel-set baguette band and a spaced round-stone band, in a three-style family.
Barrel CZ Ring, Wide Band
A wide gold-tone 316L band with a large barrel-cut white cubic zirconia and a trillion-cut stone at each shoulder.
Black PVD Dome Ring
A black PVD dome ring in 316L stainless steel. The domed face skims the finger instead of catching, and the vacuum-bonded coating is hard, even and tarnish-free.
Black Stone Ring, Fourteen Designs
A fourteen-design family in black — square, round, single and multi-stone, faceted and cabochon, on gold-tone bands.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.