Pet
Pet jewellery and ID tags, made for the collar, not the wrist
This is the one line on the site that is not a single material. Pet tags and collars are made in whatever the end product needs — 304 or 316L stainless steel for a tag that gets scratched, zinc alloy or plated aluminium for a cheaper collar, and imitation pearl or polyester for a fashion band. Every product page states the material of that product, and we do not move a design from one base to another without telling you.
Categories
2 categories, mixed bases
Every category below is a page of its own, with the pieces we supply in pet, the weight and size range for each design, and the price band it lands in.
ID Tags
A pet tag is read at arm's length by a stranger holding a frightened animal, so the only specification that matters is whether the engraving is legible at finished size.
4 designs
Pet Collars
These are display and fashion collars — a chain, a bead band or a rhinestone row that photographs well.
13 designsThe material
Pet
Pet jewellery is bought on different logic from human jewellery. The buyer is usually adding a low-price add-on to an existing order — a tag that sells for two or three dollars at retail, a collar photographed on a dog for a marketplace listing. That means the winning product is not the most refined one, it is the one that survives a chewing puppy and still photographs well.
So we separate the two jobs. A tag is judged on engraving legibility and on how the plating survives daily wear against a metal ring. A collar is judged on the clasp — a cat collar that does not release under load is a safety problem, not a style problem, which is why the fashion band collars here use a breakaway buckle rather than a buckle that only looks secure.
The material list is deliberately not uniform. Asking for 316L on a two-dollar tag is usually the wrong call; asking for zinc alloy on a tag that goes to a coastal market is the other wrong call. Tell us where it ships and we will tell you which base we would use for that price point.
- ✓Engraving on the tag is priced per side, not per character — send the artwork and we will confirm legibility at the finished size before tooling
- ✓Stainless tags are 304 or 316L as stated per design; zinc alloy and plated aluminium are named as such and never described as stainless
- ✓Breakaway buckles on cat collars, standard buckles on dog collars — the clasp is written on every collar page
- ✓Imitation pearl and polyester bands are labelled as such; we do not call a plastic pearl a freshwater pearl
- ✓Same carton, same minimum, no separate packing charge when mixed with a jewellery order
| Fact | Detail |
|---|---|
| Base materials | 304 / 316L stainless steel, zinc alloy, plated aluminium, imitation pearl, polyester — stated per product |
| Tag sizes in this line | roughly 20–45 mm across, 1.2–1.8 mm thick; the supplier-printed size is quoted on the page where it exists |
| Collar lengths | 20–60 cm depending on design, adjustable or fixed; measured as neck circumference, not as a human necklace length |
| Safety | Breakaway buckle on the fashion band collars for cats; a fixed clasp is used only where the design is a display piece |
| Engraving | Laser or stamping, one or both sides; artwork proofed at finished size before tooling |
| Packing | Individual poly bag as standard; backing card or display box on request |
Pricing
Indicative pricing for pet
Ranges are ex-works and published per item type. The final quotation is itemised against your own weight, size and plating, so it will sit inside — or explain why it sits outside — the band you see here.
| Item | Typical specification | Indicative ex-works | What it assumes |
|---|---|---|---|
| ID tag or nameplate | Metal base | $0.25 – 1.20 | At 500 pcs. Blank or engraved; a bell, a colour fill or a rhinestone face moves it up |
| Collar, chain or necklace | Mixed base | $1.00 – 4.50 | At 500 pcs. Chain width and length drive the cost; pearl and fabric bands sit at the low end |
Care
What your customer has to know
Every material has one honest caveat. Print it on the card and you will not see it again in a return.
- Wipe a plated tag with a dry cloth after it has been in water — chlorine and sea salt are what take plating off, not everyday wear.
- A stainless tag can stay on the collar permanently; a plated one will last longer if it comes off for swimming.
- Check the ring that attaches the tag to the collar — a tag is usually lost through the split ring, not through the tag itself.
Pet FAQ
Questions buyers actually ask about pet
The answers a supplier usually softens. We would rather you had them now.
Is this stainless steel or zinc alloy?
Can you engrave our own artwork, and is there a setup cost?
Are the pearls on the collar necklaces real?
My market requires a safety release on cat collars. Do you have it?
Can I mix pet items with a jewellery order to reach the minimum?
Are you a manufacturer or a trading company?
Price list
Request the pet price list
Send the basics and you will get our current price list for this material, plus stock availability and lead time.
What you get
Quoted line by line, not as a lump sum
- ✓Metal or base, plating in microns, stones and packing priced separately
- ✓Weight and dimensions on the drawing before anything is cast
- ✓A physical sample approved by you before any bulk run
- ✓Photographs of your pieces at every production milestone
- ✓Freight quoted for your route — courier, air or sea
Reply within one working day. No obligation, and no design file needed to start.
Keep reading
Guides and the other two materials
925 Sterling Silver
Priced on the gram, with the weight published for every design. The precious-metal line for brands selling real silver at boutique price points.
316L Stainless Steel
Waterproof, tarnish-free and the lowest unit cost of the three. The volume line, the men's line, and anything that has to survive daily wear.
Brass & Copper
The gold look at a fashion price point. Detailed casting, rich 18K colour, and plating quoted per micron so you choose the lifespan.
MOQ and the first order
How to size a first run you will not be stuck with.
Silver vs steel vs brass
What each base does to your retail price and returns rate.
Plating & finishes
Microns and PVD against electroplating — worth reading before you pick a base for a tag.
Get the price list
Send your line sheet. Get a price list the same day.
Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.
- ✓Price list per material, with MOQ and lead time on every line
- ✓CAD drawing in 48 hours on custom designs
- ✓Physical sample before any bulk run
- ✓Photographs of your pieces at every production milestone
Price list
Price list, one working day
Two minutes to fill in. No design file needed to start.