Skip to content
B2B fashion jewellery from Guangdong · stock lines from 10 pcs · custom OEM/ODM · CAD in 48 hours Request a price list WhatsApp Email
PS PromistarsFashion Jewellery

Sterling Silver Necklaces · Sterling Silver · MOQ 30 pcs

Sterling box chain, clean lines, low maintenance

Square links that sit flat against the neck and resist twisting, which is why it is the chain we recommend for pendants that hang from a single point.

Sterling Box Chain Necklace
Minimum order
30 pcsper design
Indicative price
$14.00 – 30.00per piece at 100 pcs
Lead time
20–30 daysafter sample approval
Sample
10–15 dayscredited on bulk orders

Overview

About this sterling box chain necklace

A box chain is built from square links that interlock into a flat profile. That flatness is the point: it lies against the neck instead of rolling, so a small pendant hangs facing forward instead of twisting onto its side the way it does on a round or rope chain.

It is also the most forgiving chain to wear hard. There are no protruding edges to catch on clothing, and no twist to straighten. The trade-off is that a box chain is less flexible than a rope, so it is only available in smaller widths; if you need a 4–5 mm chain, specify the rope or a Cuban link instead.

  • ✓Flat profile keeps a single-point pendant facing forward
  • ✓No protruding edges, so it does not catch on knitwear or scarves
  • ✓Available in a light 1.2 mm for delicate pendants and a 2.5 mm for everyday chains
  • ✓Clasp and end caps specified to the width, not to the cheapest option

Specification

What you are ordering

ItemDetail
Material925 sterling silver (92.5% silver)
LinkSquare box links, flat profile
Width1.2 / 1.5 / 2.0 / 2.5 mm
Length40 / 42 / 45 / 50 / 55 cm
Weight3.5 g at 1.2 mm × 45 cm to 12 g at 2.5 mm × 55 cm
ClaspLobster, sized to the chain
FinishHigh polish; satin on request
Bail fitPendants with a bail up to 3 mm sit and hang correctly
Minimum order30 pcs per design, per width

Variants

Configurations we build most often

1.2 mm

For small pendants and a delicate neck. Light enough to layer under a collar.

1.5 mm

The internal volume seller — enough presence for a pendant, still fine.

2.0–2.5 mm

Worn alone or as the base of a layered stack; this is the top of the range for box links.

Best for

Where this piece earns its keep

Pendant ranges

The chain we photograph most pendants on, for the reason above.

Day-to-night basics

No twist to straighten and nothing to catch, so it survives being worn continuously.

Layering bases

A 1.2 mm box under a heavier rope reads as two deliberate chains rather than a mistake.

Price list

Quote a sterling box chain necklace

Send the basics and you will get an itemised price for this piece, plus a CAD drawing in 48 hours if you want it changed.

Reply within one working day · CAD in 48 hours · sample before bulk production · no obligation.

What you get

Quoted line by line, not as a lump sum

  • ✓Metal or base, plating in microns, stones and packing priced separately
  • ✓Weight and dimensions on the drawing before anything is cast
  • ✓A physical sample approved by you before any bulk run
  • ✓Photographs of your pieces at every production milestone
  • ✓Freight quoted for your route — courier, air or sea

Reply within one working day. No obligation, and no design file needed to start.

FAQ

Questions about this sterling box chain necklace

Box chain or rope chain — which should I stock?
Both, if you can. They answer different problems: the box chain keeps a pendant facing forward and stays flat under a collar, while the rope chain carries more weight and looks substantial on its own. If you can only carry one, stock the rope at 3 mm — it sells to more customers — and add the box chain once a pendant range exists.
Why does it stop at 2.5 mm?
Because of how the link is made. A box chain is square links folded into a flat profile, and the geometry becomes impractical above about 2.5 mm — the chain turns stiff and loses the flexibility that makes it comfortable. Above that width we would specify a rope or a Cuban link instead, and we will quote it that way.
Can it be repaired if a link opens?
Yes — a box link can be closed and soldered, which is one reason to specify soldered end caps and a clasp sized to the chain. It is also worth knowing for a market where repairs are part of the service you offer: a square link is far easier to repair invisibly than a twisted rope at the same width.

Keep looking

Other pieces in this range

Pavé Solitaire Pendant NecklaceTrending

Pavé Solitaire Pendant Necklace

Single-stone pavé pendant in 925 silver on a fine chain. Halo setting specified on the drawing; stone size and colour are yours to choose.

Sterling Rope Chain NecklaceBestseller

Sterling Rope Chain Necklace

Solid 925 silver rope chain, 2–5 mm, at any length from 40 to 60 cm. Weight and clasp specified per line; the base of almost every silver pendant range.

Layered Fine Chain NecklaceTrending

Layered Fine Chain Necklace

Two or three fine 925 silver chains at fixed drop lengths on one clasp. Sells the layered look as a single piece, at a higher price than the chains would alone.

Get the price list

Send your line sheet. Get a price list the same day.

Tell us the material, the pieces and the quantity. You will get our current price list, stock availability and lead time — and if it is a custom design, a CAD drawing within 48 hours.

  • ✓Price list per material, with MOQ and lead time on every line
  • ✓CAD drawing in 48 hours on custom designs
  • ✓Physical sample before any bulk run
  • ✓Photographs of your pieces at every production milestone

Price list

Price list, one working day

Two minutes to fill in. No design file needed to start.

Reply within one working day · CAD in 48 hours · sample before bulk production · no obligation.